How to install and set up a wired PoE security camera
Connect the camera to a PoE switch or injector with Ethernet cable, wait 2 minutes for it to boot, then find its IP address in your router and open it in a web browser to configure it.
PoE cameras are simpler than WiFi cameras because the Ethernet cable provides both power and internet. Setup involves running the cable, connecting to a PoE power source, finding the camera's IP address, accessing the web interface, and configuring settings. No batteries, no WiFi signal issues.
Fix-IT-Bot will walk you through each step — just tap, no typing needed.
Skip — I just want a technicianCommon mistakes to avoid
- Using a regular network switch instead of a PoE switch — regular switches don't supply power
- Leaving the default password in place — creates a security vulnerability
- Running cable too far without testing the connection quality
- Not securing cable properly — loose cables get damaged
Signs you need professional help
- You need cable run through walls or attics — hire a low-voltage technician to check cable quality
- Camera still won't power on or appear on your network after trying all steps
Book a technician
We can fix most issues remotely in 15 minutes. Weekend appointments — book your slot and we handle the rest.
Can't fix it yourself?
Most issues are resolved remotely in 15 minutes. Weekend appointments only — no parts, no in-home visit needed.